3dmodel Wooden Bridge tutorial
Here I will tell you about 3dsmax 3dmodel Wooden Bridge tutorial.
I have used following techniques shown below in this 3ds max tutorial.
[1]-First of all you will press (ctrl +N) now you will see the new window is open
Click on the Geometry > Standard primitives > Plane .Create a Plane in the top view
Set like this in the perspective view
[2]-Create a Chamfer cylinder with the following settings:
Radius: 9, Height: 159, Fillet: 1.7.
Set the Chamfer cylinder like this in the front view
[3]-Select the Chamfer cylinder and drag it and release and you will see clone option window is open
Use the following setting set the chamfer cylinders like this in the top view
[4]-Now click on the Line button and create a line like this in the front view
Open the rendering palette
Set the Thickness: 8.0
Select the Enable in Rendering and Enable in View port
[5]-Now line should like this in the front view
[6]-Select the line and drag it and release and you will see clone option window is open
Use the following setting set the line like this in the front view
[7]-Select the lines and Press (Ctrl +V) and you will see clone option window is open
Use the following setting set the lines like this in the top view
[8]-Again create a Chamfer cylinder with the following settings:
Radius: 4.5, Height: 198.0, Fillet: 2.0.
Set the Chamfer cylinder like this in the front view
[9]-Select the Chamfer cylinder and press (Ctrl +V) and you will see clone option window is open
Use the following setting set the chamfer cylinders like this in the front view
[10]-Again select the Chamfer cylinder and press (Ctrl +V) and you will see clone option window is open
Use the following setting set the chamfer cylinders like this in the front view
[11]-Now select the Four Chamfer cylinder and press (Ctrl +V) and you will see clone option window is open
Use the following setting set the chamfer cylinders like this in the front view
[12]-Again create a Chamfer cylinder with the following settings:
Radius: 9, Height: 160, Fillet: 1.7.
Set the Chamfer cylinder like this in the top view
Now create a create a multiple copies and apply the bend Modifier with Amount: 50.0
In the X axis
[13]-Now your image should like this in the front view
[14]-Open the Material window
Click on the diffuse map button and select the Bitmap option
Pick the Wood map like this
[15]-Use the following setting and make a material like this and assin to the lines
[16]-After assign the material press (F9) and you will see the final is ready
Save the file in your folder
I Hope you will be enjoyed
Thanks for watching my tutorial
3d model converter
3d model creator
3d model design