3dmodel 3d double porch swing tutorial
Here I will tell you about 3dsmax 3dmodel 3d double porch swing tutorial.
I have used following techniques in this 3ds max tutorial.
Basic Extended primitives modeling.
[1]-First of all you will press (ctrl + N) now you will see the new window is open
Click on the Geometry > Standard primitives > Plane and use the following setting
Create a plane in the top view and set like this in the perspective view
[2]-Create a Chamfer cylinder with the following settings:
Radius: 14, Height: 534, Fillet: 4.0.
Set the Chamfer cylinder like this in the front view
[3]-Pick the select and rotate tool and rotate the object like this
[4]-Now click on the Mirror button and you will see the Mirror window is open
Select the X axis and Instance hit ok
Your object should like this
[5]-Select the both chamfer cylinder and press (Ctrl +V) and you will see clone option window is open
Use the following setting set the both chamfer cylinder like this
[6]-Create a Chamfer cylinder with the following settings:
Radius: 16, Height: 894, Fillet: 4.0.
Set the Chamfer cylinder like this in the front view
[7]-Again create Chamfer cylinder this slightly reduce size as compare to the previous Chamfer cylinder
Now set the like this in the front view
Then press (Ctrl +V) and you will see clone option window is open
Use the following setting set the both chamfer cylinder like this
[8]-Create another Chamfer cylinder with the following settings:
Radius: 3, Height: 106, Fillet: 3.0.
Set the Chamfer cylinder like this in the top view
[9]-Select the both chamfer cylinder drag it and release and you will see clone option window is open
Use the following setting set the chamfer cylinders like this
[10]-Select the ladder and click on the Mirror button you will see the Mirror palette is open
Use the following setting then set the ladder like this in the top view
[11]-Create a Circle with the following settings:
Radius: 15.
Open the Rendering palette and use the following setting
Your circle should like this in the front view
[12]-select the circle drag it and release and you will see clone option window is open
Use the following setting set the circle like this in the front view
[13]-Now click on the line button and open the Rendering palette
Set the thickness: 4.0
Select the Enable in Rendering and Enable in View port
Then create a line like this in the left view
[14]-Select the line drag it and release and you will see clone option window is open
Use the following setting set the line like this in the front view
[15]-Create a Chamfer Box with the following settings:
Radius: 106, Width: 75, Height: 11, Fillet: 0.76.
Set the Chamfer Box like this in the top view
[16]-Select the chamfer Box and press (Ctrl +V) and you will see clone option window is open
Use the following setting set the both chamfer Box like this in the top view
[17]-Open the material window
Click on the diffuse map button and select the bitmap option
Pick the Wood map like this
[18]-Use the following setting make a material like this and assign to the line
[19]-After assign the material press (F9) and you will see the final is ready
Save the file in your folder
Thanks for watching
3d model program
3d model tutorial
3d motion graphics