3d model piano studio tutorial
Here I will tell you about 3ds max 3d model piano studio tutorial.
I have used following techniques shown below in this 3ds max tutorial.
[1]-First of all you will press (ctrl +N) now you will see the new window is open
Now click on the Line button and create a line like this in the left view
Then apply the Extrude Modifier with Amount: 8
[2]-Now your line should like this in the front view
[3]-Select the line Press (Ctrl +V) you will see the clone option window is open
And use the following setting set the line like this
[4]-Create a Box with following setting:
Length: 88, Width: 250, Height: 99
Set like this in the front view
[5]-Create a Chamfer Box with following setting:
Length: 88, Width: 250, Height: 99, Fillet: 0.39
Set like this in the front view
[6]-Again create a Chamfer Box with following setting:
Length: 51, Width: 11, Height: 11, Fillet: 1.5
Set like this in the front view
[10]-Select the Chamfer Box Press (Ctrl +v) you will see the clone option window is open
And use the following setting set the Chamfer Box like this
[11]-Create a Box with following setting:
Length: 262, Width: 238, Height: 7.
Set like this in the front view
[12]-Now apply the Bend Modifier with Amount: 44.5
Your Box should like this in the left view
[13]-Create a Chamfer Box with following setting:
Length: 102, Width: 297, Height: 5, Fillet: 1.8
Set like this in the front view
[14]-Create a Box with following setting:
Length: 40, Width: 11, Height: 5.
Set like this in the top view
[15]-Select the Box drag it and release you will see the clone option window is open
Then use the following setting set the Boxes like this in the top view
[16]-Create a Chamfer Box with following setting:
Length: 27, Width: 9, Height: 4, Fillet: 0.64
Set like this in the top view
Now create a multiple copies of the Chamfer Box set like this in the top view
[17]-Open the Material Window
Click on the Standard button and select the Architectural mode
Select the Glass-Translucent and Pick the color the color like this
And assign to the red object
[18]-Make a material like this and assign to the plane
[19]-After assign the material press (F9) and you will see the final is ready
Save the file in your folder
Thanks for watching my tutorial
stock 3d models
vrml model
working model 3d