Archive for August, 2009.
Hello guys I will show how create a 3dsmax 3d toy key model tutorial.
I have used following techniques shown below in this 3ds max tutorial.
[1]-Start 3dsmax and choose "Rectangle" with the following size as shown below
Place like me
[2]-Convert the rectangle into the editable spine
Switch to the Insert button
[3]-Now inset the vertex like me
[4]-After insert the vertexes now drag like me
[5]-Now this time insert the vertexes into the bottom side and similarly drag the line like this
[6]-Apply the extrude modifier with the amount of 5.5
[7]-Create two cylinders and place like me
[8]-Select the rectangle now switch to the boolean then boolean the object like this
[9]-Create capsule like this with the following parameter
[10]-Create box like this now boolean it
[11]-Again create one box and place like me
[12]-Again boolean
[13]-Create material like this
[14]-Set the Mr omni like this with the following parameter
[15]-This is final image as shown below
Hello guys I will show how create a 3dsmax 3d table model tutorial.
I have used following techniques shown below in this 3ds max tutorial.
[1]-Start 3dsmax and choose "Rectangle" with the following size as shown below
Apply the extrude modifier with the amount of 2.5 and place like me
[2]-Open the rendering palette and use the following setting
Then create rectangle like me
[3]-Create one more copy and place like me
[4]-This is my materials
[5]-Set the mr omni like this with the following parameters
[6]-This is the final image as shwon below
Hello guys I will show how create a 3dsmax 3d switch model tutorial.
I have used following techniques shown below in this 3ds max tutorial.
[1]-Click on the chamfer box button and create chamfer box with the following size
Place like me
[2]-Convert the chamfer box into the editable poly now select the polygons in the front view port
Now apply the extrude polygons with the amount of -10.8
[3]-Create a box with the following size and place like me
[4]-Convert the box into the editable poly and select the vertexes now place like me
[5]-Your box should like this
[6]-Create two cylinder and place like this
[7]-Select the chamfer box and swicth to the boolean now boolean the cylinders like me
[8]-This time create chamfer cylinder and box now place like me
[9]-Switch to the boolean now boolean the object should like this
[10]-This is my material window
[11]-Set the skylight like this with the following parameters
[12]-This is the final image of switch
thanks for watching
Hello guys I will show how create a 3dsmax 3d switch board model tutorial.
I have used following techniques shown below in this 3ds max tutorial.
[1]-Start 3dsmax and choose "Box" with the following size
Now place the box like me
[2]-Convert the box into the ediable poly now select the polygons
Apply the extrude polygons with the amount of 10.0
[3]-Your object should like this
[4]-Create four cylinder and place like me
[5]-Create four chamfer cylinder and place like me
[6]-Create two cylinder and place like me
[7]-Create rectangle with the following size and open the rendering palette
Place like me
[8]-Create two more chamfer cylinder and place like me
[9]-Now boolean the four cylinder and like this
[10]-Select the edges and apply the extrude edges with the good following amount as shown below
[11]-Your object shoud like this
[12]-Create one copy and place like this
[13]-This is my material window
[14]-Set the skylight like this with the following parameter
[15]-This is final image as shown below
Hello guys I will show how create a 3dsmax 3d study lamp model tutorial.
I have used following techniques shown below in this 3ds max tutorial.
[1]-Start 3dsmax and choose "cylinder" with the following size
Now place the cylinder like me
[2]-Create box with the following size now boolean the box like me
[3]-Create one more box and set the like this
[4]-Select the box into the editable poly now select the vertexes
Drag the vertexes like me
[5]-Create cylinder with the following size and apply the bend modifier and FFD 3×3x3
Select the control point and drag like me
[6]-Create cylinder and apply the bevel and extrude polygons with the good following amount as shown below
[17]-Delete the select polygons and apply the shell modifier with the good following amount as shown below
[18]-Your oject should like this
[19]-This is my material
[20]-Set the skylight like this with the following parameter
[21]-This is final image as shown below
Hello guys I will show how create a 3dsmax 3d toy tank model tutorial.
I have used following techniques shown below in this 3ds max tutorial.
[1]-Start 3dsmax and choose "Rectangle" with the following size as shown below
Apply the extrude modifier with the amount of 23.0 and place like me
[2]-Convert the rectangle into the editable poly and now select the edges
When apply the extrude edges with the good following amount as shown below
[3]-Create one more copy and place like me
[4]-Create shape like me and open the rendering palette
Use the below setting
[5]-Your object should like this
[6]-Create two chamfer cylinder and apply the taper modifier with the good following amount as shown below
[7]-Place the both chamfer cylinder like this
[8]-Create one more chamfer cylinder and again apply the taper modifier with the good following amount as shown below
[9]-Place the chamfer cylinder like this
[10]-Now convert the chamfer cylinder into editable poly and select the polygons
Apply the bevel polygons with the good following parameter
[11]-Your chamfer cylinder should like this
[12]-Again make a selection and apply the extrude polygons with the amount of 1.0
[13]-Your object should like this
[14]-This is my wood material
[15]-Set the skylight like this with the following parameters
[16]This is final image of toy tank
Today I am telling you about How to Create Photoshop website template stock photo SOS in photoshop.
[1] Take a new file of 600 pixels, 600 pixels, of resolution 72 dpi in the RGB mode.
[2] Take the Text Tool" create this symbol with the help of "Character Map" select this symbol now copy and paste it color is #cab041.
[3] And then ‘Rasterize Layer’ right click the text layer select Rasterize Type.
[4] Duplicate the layer and then Cntl+Click the Duplicate Layer to get selection then fill the selection
with #98782f. And move it in the new position like in the next picture.
[5] Duplicate the layer and move it; and move it again like this:
[6] After that select the all duplicate layers and then press Cntl+E, to Merge Down Layers.
Take the "Dodge Tool" 
& then Highlight the following parts as shown below.
[7] After that select the 1st layer then with the "Dodge Tool" Highlight the following parts as shown below.
[8] Take the "Burn Tool" 
& then create the following Shading
with the help of Burn Tool.
[9] Open a new layer then Cntl+Click this layer to get the selection then right click select
Stroke apply the following settings.
[10] With the "Dodge Tool" Highlight the following parts as shown below.
[11] Thank you for viewing this tutorial, and make sure you have fun while making yours!
Today I am telling you about How to Create Photoshop website template stock photo gold key in photoshop.
[1] Take a new file of 600 pixels, 600 pixels, of resolution 72 dpi in the RGB mode.
[2] Create a new shape with the help of "Ellipse Shape Tool" fill that layer with #775f31.
[3] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’
In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok & fill the selection with #fdb757.
[4] Take the "Burn Tool" 
& then create the following Shading
with the help of Burn Tool.
[5] Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’
In Make Selection ‘feather radius’ should 0 pixels,Tick on New Selection & then ok & fill the selection with #ffc770.
[5] After that create the following selection with the help of "Polygonal Lasso Tool" then take the
"Burn Tool" create the following Shading as shown below.
[6] Now like this create the following Shading as created in the previous step.
[7] Take the "Dodge Tool" 
& then Highlight the following parts as shown below.
[8] Create a new shape with the help of "Pen Tool" fill that layer with #6d542c.
[9] After that select the first shape layer then create the following selection with
the help of "Ellipse Shape Tool" then hit the delete key.
[10] Adjust Blending Options for this layer.
[11] Create the following selection with the help of "Pen Tool" then go to
Select>Modify>Feather Selection by 3px.
[12] Open a new layer fill the selection with #5e4f24.
[13] Create the following Shading with the help of "Burn Tool & Dodge Tool".
[14] Take the "Brush Tool" set your brush size see in the next image.
[15] Now create a new layer make sure your forground is set to black. Now create ‘Stroke’ with the help of
‘Pen Tool’ right click select ‘Stroke Path’ now select ‘Brush’ click ok.
[16] Now like this create the other with above techniques.
[17] Now take the "Eraser Tool" now erase the some parts see in the next image.
[18] Use Custom Shape Tool and Draw.
[19] Thank you for viewing this tutorial, and make sure you have fun while making yours!
Hello guys I will show how create a 3dsmax 3d skate board model tutorial.
I have used following techniques shown below in this 3ds max tutorial.
[1]-Start 3dsmax and choose "Rectangle" with the following size as shown below
Apply the extrude modifier with the amount of 2.0 and place like me
[2]-Convert the rectangle into the editable poly now select the edges
Apply the chamfer edges with the amount of 0.19
[3]-Your object should like this
[4]-Select the vertexes and drag like me
[5]-Create cylinder with the following size and convert into the editable poly
Select the polygons and apply the extrude polygons with the amount of -5.0
[6]-Your cylinder should like this
[7]-Create one cylinder and place like me
[8]-Your object should like this
[9]-This is my material palette
[10]-Set the mr omni with the following parameters
[11]-This is final image as shown below
Hello friends today I will show how create 3dsmax 3d selecton key model tutorial.
I have used following techniques shown below in this 3ds max tutorial.
[1]-Choose the circle and create circle with the following size
Now place like this
[2]-Convert the circle into the editable poly and now select the vertexes
Drag like me
[3]-Apply the turbo smooth modifier with the amount of 1.0
[4]-Create chamfer cylinder and place like me
[5]-Create two more chamfer cylinder and place like me
[6]-Switch to the line tool and create a shape like this in the top view port
Now apply the extrude modifier with the amount of 3.0
[7]-Your object should like this
[8]-This is my material
[9]-Now this is my final image
