Archive for September, 2008.
Here I will tell you about 3dsmax 3dmodel garden swing studio tutorial.
I have used following techniques in this 3ds max tutorial.
Editable poly techniques and basic standard primitives modeling
[1]-First of all you will press (ctrl + N) now you will see the new window is open
Click on the Geometry > Standard primitives > Plane and use the following setting
Create a plane in the top view and set like this in the perspective view
[2]-Create a cylinder with the following settings:
Radius: 17, Height: 993.
Create in a top view
[3]-Select the cylinder drag it and release you will see the clone option palette is open
Select Instance Mode
Number of copies: 3
Set the cylinder like this in the top view
[4]-Create a box with the following settings:
Length: 336, Width: 370, Height: 12.
Create in a top view
[5]-Now select the Box and pick the (Select and Rotate)
Rotate the object like this
[6]-Select the box and press (Ctrl +V) and you will see clone option window is open
Use the following setting set the both box like this
[7]-Create a Rectangle with the following settings:
Length: 287, Width: 362.
Open the rendering palette
Select the Enable in Rendering and Enable in View port
Set the (Thickness: 10.0)
Create in a top view and set like this in the top view
[8]-Again create a Rectangle with the following settings:
Length: 285, Width: 361.
Apply the Extrude Modifier and set the Amount: 13.5
Set the box like this in the front view
[9]-Create a box with the following settings:
Length: 1681, Width: 364, Height: 11.
Create in a top view set like this in the front view
[10]-Create another box with the following settings:
Length: 295, Width: 1386, Height: 12.
Now apply the Bend Modifier and Set the Angle 67 on the (X axis)
Now your object should like this
[11]-Now click on the Line button
Open the rendering palette
Select the Enable in Rendering and Enable in View port
Set the (Thickness: 20.0)
Create line like this in the front view
[12]-Select the line press (Ctrl +V) and you will see clone option window is open
Use the following setting set the both line like this
[13]-Again open the rendering palette
Select the Enable in Rendering and Enable in View port
Set the (Thickness: 16.0)
Create line like this in the front view
[14]-Then create a multiple copies of the line with the help of clone option
Set line like this in the front view
[15]-With still same rendering parameter creates more line like this
[16]-Now open the material window
Click on the diffuse map button and select the bitmap option
And pick the woods jpg like this
[17]-Open the material window and make a material like this
[18]-After assign the material press (F9) and you will see the final is ready
Save the file in your folder
Thanks for watching
blender 3d models
bryce 3d graphics
create 3d models
Photoshop design road sing logo in Photoshop
Free adobe cs3 photoshop design in photoshop
Here we will tell you how to make a Cool Photoshop Drawing bottle logo icon in photoshop.
[1] Take a new file of 300 pixels, 500 pixels, of resolution 72 dpi in the RGB mode.
[2] Create a new shape with the help of “Pen Tool”
[3] Now right click select make selection.
Create a new layer with the selection with Black color.
[4] Duplicate the layer. Right Click and select Flip Horizontal.
[5] Now Duplicate again. Cntl+T, Minimize your shape click ok.
After that Cntl+Click this layer to get selection.
Now fill the selection with #423501. Do not “D” select.
[6] Take the “Burn Tool” 
then create following shading with the help of Burn Tool.
[7] Repeat step 5, Fill that layer with #404040.
[8] Take the “Burn Tool” 
then create following shading with the help of Burn Tool.
[9] Create a new shape with the help of Rectangular Marquee Tool. Fill that layer with #58585a.
[10] Take the “Burn Tool” 
then create following shading with the help of Burn Tool.
[11] Create a new shape with the help of Rrounded Rectangle Tool. Fill that layer with #v555557.
[12] Create following shading with the help of Burn Tool.
[13] Create a new shape with the help of Rectangular Marquee Tool. Fill that layer with #9f0908.
[14] Take the “Dodge Tool” 
then create following hightligh with the help of Dodge Tool.
[15] Create a new shape with the help of Rectangular Marquee Tool. Fill that layer with #abacb1.
[16] Take the “Dodge Tool” 
then create following hightligh with the help of Dodge Tool.
[17] Take the Pen Tool create a shape like this.
[18] Take the Brush Tool, press Shift+F5 apply the following settings.
[19] After that take the Pen Tool again right click select make Stroke Path apply the following settings.
[20] Create two line with the help of Brush Tool, color is #2e2f31.
[21] Done!!
I hope you like it.
adobe photoshop drawing
adobe photoshop effects
adobe photoshop text effects
Photoshop design unique logo in photoshop
Website contentbox design photoshop tutorial in photoshop
Today I will tell you about How to Create United Nation UNO Logo Icon Services
[1]-First of all Open New Document of Custom size,Height & Width 450×450 pixels, Resolution 72 & Mode RGB Color
[2]-Now Open New Layer & then create the following selection with the help of “Elliptical Marquee Tool”
[3]-Now fill the selection with ‘aba000′ color & then create the following shape with the help of ‘Pen Tool’ right click
select ‘Make Selection’
[4]-Now use the following settings in Make Selection
[5]-Now your image should look like as shown below
[6]-Now Open New Layer & then fill the selection with ‘aba000′ color & then make the Duplicate Layer with the help of Ctrl+J
& after that little rotate the following shape with the help of Ctrl+T & then press ENTER
[7]-Now like this make the Other Duplicate Layers & then rotate each layer with the help of Ctrl+T & your image should look
like as shown below
[8]-Now merge all Layers with the help of Ctrl+E & then go to Blending Options,select Inner Glow & use the following
settings
Photoshop Technique-How to use the Inner Glow feature
[9]-Now select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay feature
[10]-Now Open New Layer & then create the following selection with the help of Elliptical Marquee Tool
[11]-Now fill the selection with ‘2e3192′ color & then open other image of globe with the help of Ctrl+O & adjust in First
Document with the help of Move Tool
[12]-Now Blending Mode of this Layer should ‘Saturation’
[13]-Now your image should look like as shown below
[14]-Now select Text Tool 
& create the any Text
See below for Final Photoshop Output.I hope this is a good tutorial & U can use these Photoshop Techniques in your Graphics
Design Project
adobe photoshop drawing
adobe photoshop effects
adobe photoshop text effects
Photoshop website ichat icon design in photoshop
Photoshop security logo icon tutorial in Photoshop
Here I will tell you about 3dsmax 3dmodel Grenade studio tutorial.
I have used following techniques in this 3ds max tutorial.
Editable Modeling techniques
[1]-First of all you will press (ctrl +N) now you will see the new window is open
Now click on the Geometry > Standard primitives > Plane use the following setting
Creates a plane like this in the top view and set like this in the perspective view
[2]-Create a Cylinder with the following settings:
Radius 47, Height: 177.
Create in a top view and set like this in the front view
[3]-Select the Cylinder convert into the Editable Poly
Select the polygon like this
Open the Extrude polygon palette and set the (Extrusion Height: 2.0) With Local Normal mode
[4]-Again select the Polygon like this
Open the Bevel polygon palette and set the (Height: 5.0) and (Outline Amount: -1.8) With Local Normal mode
Then hit OK
[5]-Now your Cylinder should like this in the front view
[6]-Open the material window and make a material like this and assign to the cylinder
[7]-Select the polygons in the front view and make a material like this
Then assign to the selection
[8]-Again select the polygon in the top view make another material
Then assign to the selection
[9]-Now apply the Turbo Smooth Modifier With (illustration: 3)
Now your cylinder should like this
[10]-Pick the line tool and make a shape like this in the front view
Then apply the Extrude Modifier with (Amount: 20)
Your line should like this in the top view
[11]-Create a Circle with the following settings:
Radius 20.0.
Open the Rendering palette and us the following setting
Create Circle in a top view and set like this in the front view
[12]-Select the Circle and press (Ctrl +V) and you will see the clone option window is open
Select the Instance Mode and hit ok
[13]-Set the both circle like this
[14]-Create a another small circle with same rendering parameter and set like this front view
[15]-Pick the Text tool and write a text (M 18) and apply the extrude Modifier with Amount: 0.5
And also apply the Bend modifier with angle (79.0) in the X axis
[16]-Set the text like this in the front view
Now similarly create more text like this in the front view
[17]-Now after set the texts press (F9) and you will see the final is ready
Save the file in your folder
Thanks for watching my tutorial
3d model program
3d model tutorial
3d motion graphics
Wholesale Silver Pendant Icon
3dmodel 3d garden hut studio tutorial
Hello my friends
Today i will show you how to create a Cool Photoshop drawing flat screen logo icon in photoshop.
[1] Take a new file of 250 pixels, 250 pixels, of resolution 72 dpi in the RGB mode.
[2] Create a shape with the help of Polygonal Lasso Tool.
[3] Choose Gradient to and set properties like this.
[4] Make a new layer. Apply gradient to selection to get the result like this.
[5] Create the following shape with the help of Polygonal Lasso Tool.
[6] Choose Gradient to and set properties like this.
[7] Make a new layer. Apply gradient to selection to get the result like this.
[8] Double click the layer to open layer style window. Apply settings as shown.
[9] Create another shape with the help of Polygonal Lasso Tool.
Make a new layer. Fill the selection with #9f9f9f.
[10] Double click the layer to open layer style window. Apply settings as shown.
[11] Create a new shape with Polygonal Lasso Tool.
[12] Choose Gradient to and set properties like this.
[13] Make a new layer. Apply gradient to selection to get the result like this.
[14] Change the Blending Mode to Lighten.
[15] Repeat above step (create new layer, create a shape with polygonal Lasso, fill Gradient).
[16] Create the following selection with the help of “Pen Tool”.
[17] Make a new layer fill the selection with White.
Now set the Opacity 23%.
[18] Create a new shape with the help of Elliptical Marquee Tool.
Make a new layer fill the selection wiht #aeaeae.
[19] Take the “Dodge Tool” 
highlight the following parts
with the help of Dodge Tool.
[20] Double click the layer to open layer style window. Apply settings as shown.
[21] Take the Elliptical Marquee Tool apply the settings.
[22] Create a new layer, Ctrl+Click on this layer to get selection.
After that create the following selection with Elliptical Tool.
[23] Now fill the selection with #919191.
[24] Double click the layer to open layer style window. Apply settings as shown.
[25] Create a new shape with the help of POlygonal Lasso Tool.
Make a new layer fill the selection with #848484.
[26] Now select Burn Tool 
& create the following shading with the help of Burn Tool.
[27] After that create a new shape with the help of Polygonal Lasso Tool.
[28] Choose Gradient to and set properties like this.
[29] Apply gradient to selection to get the result like this.
[30] Create another shape and fill the same gradient.
[31] This is my final image.
adobe photoshop 7 tutorial
adobe photoshop bubble
adobe photoshop cs2 text
Photoshop design car bmw logo in Photoshop
Photoshop design loudspeake logo in Photoshop
