Archive for August, 2008.
Here I am telling you about How to Create Photoshop Solar Cycle Logo Icon
[1]-First of all Open New Document of Custom size,Height & Width 450×450 pixels,Resolution 72 & Mode RGB Color
[2]-Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’
[3]-Now use the following settings in Make Selection
[4]-Now your image should look like as shown below
[5]-Now fill the selection with ‘f43434b’color & then select ‘Burn Tool’ 
& create the following
Shading
[6]-Now select “Dodge Tool” 
& Highlight the some Parts like as shown below
[7]-Now select Dodge Tool & use the following size & settings
[8]-Now create the following shape with the help of Pen Tool,right click select “Stroke Path”
[9]-In ‘Stroke Path’ select “Dodge Tool” & then ok
[10]-Now your image should look like as shown below
[11]-Now set the 5 pxl Brush Tool & then Open New Layer & create the following shape with the help of ‘Pen Tool’ right click
select “Stroke Path”
[12]-Now use the following settings
[13]-Now Open New Layer & then create the following selection with the help of “Rectangular Marque Tool” with hold Shift
[14]-Now fill the selection with ‘cdcdcd’ color & then create the following Shading with the help of Burn & Dodge Tool &
after that create the following selection with the help of “Elliptical Marquee Tool”
[15]-Now Open New Layer & then fill the selection with ‘fbfbf3′color & then go to Blending Options,select INNER SHADOW
Photoshop Technique-How to use the Inner Shadow feature
[16]-Now set the 5 pxl Brush Tool & then Open New Layer & create the following shape with the help of Ellipse Tool,right
click select “Stroke Path”
[17]-In Stroke Path select “Brush” & then ok
[18]-Now your image should look like as shown below
[19]-Now go to Blending Options,select Bevel & Emboss & use the following settings
Photoshop Technique-How to use the Bevel & Emboss feature
[20]-Now make the Duplicate Layer with the help of Ctrl+J & then adjust with the help of Move Tool
[21]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’ with hold Shift &
after that fill the selection with ‘363636′color
[22]-Now set the 6 pxl Brush & then Open Layer & create the following shape with the help of ‘Pen Tool’ right click select
Stroke Path
[23]-Now use the following settings
[24]-Now go to Blending Options,select Bevel & Emboss & use the following settings
Photoshop Technique-How to use the Bevel & Emboss feature
[25]-Now like this create the others & then Open New Layer & create the following selection with the help of Pen Tool
[26]-Now fill the selection with any color & then go to Blending Options,select Bevel & Emboss & use the following settings
Photoshop Technique-How to use the Bevel & Emboss feature
[27]-Now Open New Layer & then create the following selection with the help of Rectangular Marquee Tool & after that fill
the selection with ‘363636′color
[28]-Now set the 3pxl Brush & then Open New Layer & create the following shape with the help of Pen Tool,right click select
Stroke Path
[29]-In Stroke Path select ‘Brush’ & then Ok & like this create the others & use the Bevel & Emboss Options as used previous
Steps & after that create the following selection with the help of Rounded Rectangle Tool
[30]-Now Open New Layer & then fill the selection with any color & then go to Blending Options,select Inner Shadow & use
the following settings
Photoshop Technique-How to use the Inner Shadow feature
[31]-Now select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay feature
[32]-Now set the 1 pxl Brush & then Open New Layer & create the following shape with the help of ‘Pen Tool’ right click
select Stroke Path
[33]-Now use the following settings
[34]-Now like this create the others & your image should look like as shown below
[35]-Now select ‘Text Tool’ 
& create the any Text
See below for Final Photoshop Output.I hope this is a good tutorial & U can use these Photoshop Techniques in your Graphics
Design Project
adobe photoshop 7 tutorial
adobe photoshop bubble
adobe photoshop cs2 text
Photoshop design envelop logo in photoshop
Photoshop design toy pencil logo in photoshop
Hello my friends
Today i will show you how to create a Cool Photoshop flat computer lcd monitor in photoshop.
[1] Take a new file of 500 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.
[2] Now create a shape with the help of Rectangle Shape Tool.
[3] Add the following layer styles.
[4] Create another shape with Rectangle Shape Tool with the same layer styles.
Press Ctrl+T. Right Click and select Perspective adjust nodes like this.
[5] Now create a new shape with the help of Rectangle Shape Tool.
[6] For this shape add the following layer styles.
[7] Create a new shape with the help of Rectangular Marquee Tool.
Make a new layer. Fill the selection with Black.
[8] Now add the following layer styles.
[9] Drag the Layer above the 1st shape layer.
[10] Create a new shape with the help of Rectangular Marquee Tool.
Make a new layer. Fill the selection with Black.
[11] Go to Filter>Blur Motion Blur apply the following settings.
[12] For this shape add the following layer styles.
[13] Now create a new shape with the help of Rectangle Shape Tool.
[14] Add the following layer styles.
[15] Create a shape with the help of Ellipse Tool color is Gray.
[16] Create the following shape with the help of “Polygonal Lasso Tool”.
Make a new layer. Fill the selection with White color.
[17] Now give the some layer styles.
[18] Duplicate that layer and place it like me.
[19] Now I have a add previouly create my wallpaper.
[20] Then go to Filter>Render>Lens Flare apply the following settings.
[21] Done!!!
batch watermark photoshop
bend text in photoshop
best photoshop tutorials
Photoshop Palace Under Water Animation
Photoshop design digital clock in photoshop
Here I will tell you about 3dsmax 3dmodel 3d double porch swing tutorial.
I have used following techniques in this 3ds max tutorial.
Basic Extended primitives modeling.
[1]-First of all you will press (ctrl + N) now you will see the new window is open
Click on the Geometry > Standard primitives > Plane and use the following setting
Create a plane in the top view and set like this in the perspective view
[2]-Create a Chamfer cylinder with the following settings:
Radius: 14, Height: 534, Fillet: 4.0.
Set the Chamfer cylinder like this in the front view
[3]-Pick the select and rotate tool and rotate the object like this
[4]-Now click on the Mirror button and you will see the Mirror window is open
Select the X axis and Instance hit ok
Your object should like this
[5]-Select the both chamfer cylinder and press (Ctrl +V) and you will see clone option window is open
Use the following setting set the both chamfer cylinder like this
[6]-Create a Chamfer cylinder with the following settings:
Radius: 16, Height: 894, Fillet: 4.0.
Set the Chamfer cylinder like this in the front view
[7]-Again create Chamfer cylinder this slightly reduce size as compare to the previous Chamfer cylinder
Now set the like this in the front view
Then press (Ctrl +V) and you will see clone option window is open
Use the following setting set the both chamfer cylinder like this
[8]-Create another Chamfer cylinder with the following settings:
Radius: 3, Height: 106, Fillet: 3.0.
Set the Chamfer cylinder like this in the top view
[9]-Select the both chamfer cylinder drag it and release and you will see clone option window is open
Use the following setting set the chamfer cylinders like this
[10]-Select the ladder and click on the Mirror button you will see the Mirror palette is open
Use the following setting then set the ladder like this in the top view
[11]-Create a Circle with the following settings:
Radius: 15.
Open the Rendering palette and use the following setting
Your circle should like this in the front view
[12]-select the circle drag it and release and you will see clone option window is open
Use the following setting set the circle like this in the front view
[13]-Now click on the line button and open the Rendering palette
Set the thickness: 4.0
Select the Enable in Rendering and Enable in View port
Then create a line like this in the left view
[14]-Select the line drag it and release and you will see clone option window is open
Use the following setting set the line like this in the front view
[15]-Create a Chamfer Box with the following settings:
Radius: 106, Width: 75, Height: 11, Fillet: 0.76.
Set the Chamfer Box like this in the top view
[16]-Select the chamfer Box and press (Ctrl +V) and you will see clone option window is open
Use the following setting set the both chamfer Box like this in the top view
[17]-Open the material window
Click on the diffuse map button and select the bitmap option
Pick the Wood map like this
[18]-Use the following setting make a material like this and assign to the line
[19]-After assign the material press (F9) and you will see the final is ready
Save the file in your folder
Thanks for watching
3d model program
3d model tutorial
3d motion graphics
Photoshop design church bell logo in photoshop
Photoshop eye security website logo in photoshop
Today I am telling you about How to Create Photoshop Women Laptop Notebook Bag Icon
[1]-First of all Open New Document of Custom size,Height & Width 330×370 pixels,Resolution 72 & Mode RGB Color
[2]-Now Open New Layer & then create the following shape with the help of ‘Pen Tool’ right click select ‘Make Selection’
[3]-Now use the following setting in Make Selection
[4]-Now your image should look like as shown below
[5]-Now fill the selection with ‘363636′color & then select “Dodge Tool” 
& Highlight the some
parts like as shown below
[6]-Now go to Blending Options select Inner Shadow & use the following settings
Photoshop Technique-How to use the Inner Shadow feature
[7]-Now create the following selection with the help of “Pen Tool”
[8]-Now Open New Layer [this Layer should below Layer-1] & then fill the selection with ‘363636′color & then select “Dodge
Tool”
[9]-Now create the following Shape with the help of Pen Tool,right click select “Stroke Path”
[10]-In Stroke Path select ‘Dodge Tool’ & then Ok
[11]-Now Open New Layer & then create the following selection with the help of ‘Pen Tool’
[12]-Now fill the selection with ‘e04f4a’color & then select “Burn Tool” 
& create the following
Shading
[13]-Now select “Dodge Tool” & create the following shape with the help of Pen Tool,right click select Strok Path
[14]-In Stroke Path select “Dodge Tool” & then ok
[15]-Now like this Highlight the other parts like as shown below
[16]-Now go to Filter>Artistic>Rough Pastels & use the following settings
Photoshop Technique-How to use the ‘Rough Pastels’ feature
[17]-Now Open New Layer & then create the following selection with the help of Pen Tool
[18]-Now fill the selection with any color & then go to Blending Options,select Inner Shadow & use the following settings
Photoshop Technique-How to use the Inner Shadow feature
[19]-Now select Gradient Overlay & use the following settings
Photoshop Technique-How to use the Gradient Overlay feature
[20]-Now Open New Layer & then create the following selection with the help of Pen Tool
[21]-Now fill the selection with ‘363636′color & Highlight the some parts like as shown below
[22]-Now create the following selection with the help of Pen Tool & then press Ctrl+J
[23]-Now go to Blending Options,select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow feature
[24]-Now Open New Layer & then create the following selection with the help of Pen Tool
[25]-Now fill the selection with ‘e6e6e6′color & then go to Blending Options,select Inner Shadow & use the following settings
Photoshop Technique-How to use the Inner Shadow feature
[26]-Now select Stroke Structure & use the following settings
Photoshop Technique-How to use the Stroke structure feature
[27]-Now create the following selection with the help of Pen Tool
[28]-Now Open New Layer [this Layer should below all Layers] & then fill the selection with ‘363636′color & like this
create the others
[29]-Now set the 3 pxl Brush & then Open New Layer & create the following shape with the help of Pen Tool right click
select Stroke Path
[30]-Now use the following settings in Stroke Path
[31]-Now like this create the others & then create the following selection with the help of Pen Tool
[32]-Now fill the selection with ‘363636′ color & then create the following selection with the help of Pen Tool & then press
DELETE
[33]-Now like this create the others & then create the following Shape with the help of ‘Pen Tool’ right click select
‘Stroke Path’
[34]-In Stroke Path select ‘Brush’& then ok & after that set the 2 pxl Brush & then create the following shape with the
help of Pen Tool,right click select ‘Stroke Path’
[35]-In Stroke Path select ‘Brush’ & then ok
[36]-Now create the any Text with the help of Text Tool
Thanks for read this Photoshop Tutorial.I hope U have enjoyed & learnt some Photoshop Techniques & the Final Output of this
Tutorial is shown below
creating logos with photoshop
creating water in photoshop
creating watermarks in photoshop
Photoshop design medical icon logo in photoshop
Photoshop design hotel bell logo in photoshop
Here we will tell you how to make a Cool Photoshop weightloss website kitchen scale in photoshop.
[1] Take a new file of 500 pixels, 500 pixels, of resolution 72 dpi in the RGB mode.
[2] Create a new shape with the help of “Pen Tool”.
[3] Right click select make selection. Make a new layer.
Fill the selection with #969b9e.
[4] Select “Dodge Tool” 
highlight the following parts
with the help of Dodge Tool.
[5] Duplicate this layer and place it like me.
[7] Create a following shape with the help of “Pen Tool”.
[8] Take the “Brush Tool” and set properties like this.
[9] Select Pen Tool again right click select Stroke Path apply the following settings.
[10] You get the result like this.
[11] Take the “Eraser Tool” 
then erase the outside area.
[12] Now add the following layer style for this shape.
[13] Duplicate this layer and place it like me.
[14] Now create a new shape with the help of Rectangle Shape Tool color is #b0b4b7.
[15] Press Ctrl+T. Right Click and select Warp. Select “Arch” style from the preset warp shapes.
Apply settings as shown.
[16] Now Rasterize Layer press cntl+T, Free Transform rotate your shape like this.
[17] Cntl+Click this layer to get selection
press cntl+I to Inverse Selection hit the delete key.
[18] Now select Burn Tool 
& create the following shading with the help of Burn Tool.
[19] For this shape add the following layer styles.
[20] Create a new shape with the help of Ellipse Tool.
[21] Now add the following layer styles.
[22] Create another circle with Ellipse Tool.
[23] For this shape add the following layer styles.
[24] Create a new shape with the help of Elliptical Marquee Tool.
Make a new layer, fill the selection with White.
[25] For this white shape add the following layer styles.
[26] Take the Elliptical Marquee Tool apply the following settings.
[27] Now Cntl+Click the previous layer to get selection.
After that create a following selection like this.
[28] Make a new layer fill the selection with Black.
[29] For this shape add the following layer styles.
[30] Create the following shape with the help of “Pen Tool”.
Right click select make selection, make a new layer.
Fill the selection with Black color.
[31] For this shape add the following layer styles.
[32] Now create a new shape with the help of Rectangle Tool.
[33] Now add the following layer styles.
[34] Create another shape with the help of “Pen Tool”.
Right click select the make selection. Fill that layer with #39474a.
[35] Now take the Text Tool create some text.
[36] This is my final result. I hope you like it.
animated gif photoshop cs3
animated gif using photoshop
animated photoshop
Photoshop custom web design header in photoshop
3dmodel spark plug studio tutorial
Here I will show you about 3dsmax 3dmodel 3d Night lamp studio tutorial.
I have used following techniques in this 3ds max tutorial.
Editable Poly Modeling techniques
[1]-First of all you will press (ctrl +N) now you will see the new window is open
Now click on the circle button and use the following setting then open the
Rendering palette set the (Thickness: 2.0) select the Enable in Renderer and Enable in view port
[2]-Now create a circle like this in the front view
[3]-Pick the (Select and Uniform scale) tool and drag the circle like this
[4]-Select the circle and drag it and release it. You will see the clone option window is
Set the (number of copies 
then hit ok
[5]-Create a NGon with following setting:
Radius: 66, Sides: 6
Then apply the Extrude Modifier with Amount: 180
Now your NGon should like this in the front view
[6]-Now convert into the Editable poly
Then select the polygon like this in the front view
[7]-open the Extrude Polygon palette
Set the Extrusion Amount: 3
Select the by polygon mode and hit ok
Your image should like this in the front view
[8]-Select the polygons like this
Open the Material window and click on the Standard button and select the Architectural mode
Select the Paper-translucent and click on the (none) map button then select the bitmap option
Pick the map like this and assign to the selection
[9]-Select the Polygon like this
Pick the jpg like this and assign to the selection
[10]-Create a NGon with following setting:
Radius: 72, Sides: 6
Then apply the Extrude Modifier with Amount:6
Now your NGon should like this in the front view
[11]-Select the NGon and press the (Ctrl + V) and use the following setting
Then set the both NGon like this in the front view
[12]-Create a box with following setting
Length: 194, Width: 9, Height:4.
Create in the top view like this
[13]-Select the box drag it and release you will see the clone option window is open
Then use the following setting set the boxes like this in the top view
[14]-Create a rectangle with following setting
Length: 99, Width: 8.
Now apply the extrude modifier with Amount: 2
Then set the rectangle like this in the front view
[15]-Now click on the Mirror button and you will see the mirror palette is open
Use the following setting and now select the both rectangle
Create a three number of copies of the both rectangle with the help of the clone option palette
[16]-Now your object should like this in the perspective view
[17]-Open the Material Window and make a material like this and assign to the circles
[18]-After assign the material press (F9) and you will see the final is ready
Save the file in your folder
Thanks for watching my tutorial
3d model converter
3d model creator
3d model design
Photoshop design hotel bell logo in photoshop
Photoshop design envelop logo in photoshop
Today I will teach you about How to Create Photoshop X Lamp Logo Icon
[1]-First of all Open New Document of Custom Size,Height & Width 450×450 pixels,Resolution 72 & Mode RGB Color
[2]-Now fill the Background with ‘a27852′ color & then create the following Shape with the help of ‘Pen Tool’ right click
select ‘Make Selection’
[3]-Now use the following settings in Make Selection
[4]-Now your image should look like as shown below
[5]-Now fill the selection with ‘eccfa5′color & then select ‘Burn Tool’ 
& create the
following shading
[6]-Now select ‘Dodge Tool’ 
& Highlight the some parts like as shown below
[7]-Now set the 2 pxl Brush & then Open New Layer & create the following shape with the help of ‘Pen Tool’ right click
select ‘Stroke Path’
[8]-Now use the following settings in Stroke Path
[9]-Now your image should look like as shown below
[10]-Now like this create the others & then Open New Layer & create the following shape with the help of Pen Tool,right
click select ‘Make Selection’
[11]-In Make Selection ‘feather Radius’ should ‘0′ pixels,Tick on New Selection & then Ok & your image should look like
as shown below
[12]-Now fill the selection with ‘f5efcc’color & then select Dodge Tool 
& Highlight the some parts
like as shown below
[13]-Now go to Blending Options,select Stroke Structure & use the following settings
Photoshop Technique-How to use the Stroke Structure feature
[14]-Now Open New Layer & then create the following selection with the help of Pen Tool
[15]-Now fill the selection with ‘f5efcc’ color & then Highlight the some parts with the help of “Dodge Tool” & then create
the following selection with the help of ‘Pen Tool’
[16]-Now fill the selection with ‘f5efcc’color & then highlight the some parts & after that set 2 pxl Brush, Open New
Layer & create the following Shape with the help of Pen Tool,right click select “Stroke Path”
Photoshop Technique:your forground color should ‘f1dfbb’color
[17]-In Stroke Path select “Brush” & then Ok & like this create the others
[18]-Now Open New Layer & then create the following selection with the help of Pen Tool
[19]-Now fill the selection with ‘fbf4e9′ color & Highlight the some parts like as shown below
[20]-Now select Erase Tool & use the following settings
[21]-Now Erase the some Parts like as shown below
[22]-Now Select Background Layer & then create the following selection with the help of Elliptical Marquee Tool & then press
Ctrl+Shift+I & create the following shading with the help of Burn Tool
[23]-Now select “Dodge Tool” 
& Highlight the some parts & after that create the following selection with
the help of Polygonal Lasso Tool
[24]-Now create the following shading with the help of Burn & Dodge Tool
See below for Final Photoshop Output.I hope this is a good tutorial & U can use these Photoshop Techniques in your Graphics
Design Project
cool draw
cool text in photoshop
create a logo in photoshop
Photoshop design strawberry logo in photoshop
Photoshop design sale banner logo in photoshop
Here we will tell you how to make a Cool Photoshop home sale board logo in photoshop.
[1] Take a new file of 300 pixels, 400 pixels, of resolution 72 dpi in the RGB mode.
[2] Create a new shape with the help of Rectangular Marquee Tool.
Make a new layer. Fill the selection with #a58554. Do not “D” select.
[3] Take the “Burn Tool” 
create the following shading with the help of Burn Tool.
[4] Now add the following layer styles.
[5] Now take the Shape Tool select this one.
[6] Create a shape fill that layer with same color.
[7] Take the “Dodge Tool” 
highlight the following parts
with the help of Dodge Tool.
[8] Create a new shape with the help of “Polygonal Lasso Tool”.
Make a new layer. Fill the selection with #f9dbc1.
[9] Take the “Burn Tool” 
create the following shading with the help of Burn Tool.
[10] Now add the following layer styles.
[11] Create a new shape with the help of “Polygonal Lasso Tool”.
Make a new layer. Fill the selection with #4e4037.
[12] Take the “Dodge Tool” 
highlight the following parts
with the help of Dodge Tool.
[13] Create a shape with the help of Elliptical Marquee Tool.
Make a new layer. Fill the selection with Black.
[14] For this shape add the followng layer styles.
[15] Create a new shape with the help of Elliptical Marquee Tool.
Make a new layer. Fill the selection with light gray.
[16] Create the following selection with the help of “Polygonal Lasso”.
Make a new layer fill the selection with #048037.
[17] Create the following selection with the help of “Polygonal Lasso”.
Make a new layer fill the selection with #3cb448.
[18] I have add some rusty text.
Finish this is my final result.
adobe photoshop drawing
adobe photoshop effects
adobe photoshop text effects
3dmodel 3d sleeping bed studio tutorial
Photoshop design loudspeake logo in Photoshop
Here I will tell you about 3ds max 3d model piano studio tutorial.
I have used following techniques shown below in this 3ds max tutorial.
[1]-First of all you will press (ctrl +N) now you will see the new window is open
Now click on the Line button and create a line like this in the left view
Then apply the Extrude Modifier with Amount: 8
[2]-Now your line should like this in the front view
[3]-Select the line Press (Ctrl +V) you will see the clone option window is open
And use the following setting set the line like this
[4]-Create a Box with following setting:
Length: 88, Width: 250, Height: 99
Set like this in the front view
[5]-Create a Chamfer Box with following setting:
Length: 88, Width: 250, Height: 99, Fillet: 0.39
Set like this in the front view
[6]-Again create a Chamfer Box with following setting:
Length: 51, Width: 11, Height: 11, Fillet: 1.5
Set like this in the front view
[10]-Select the Chamfer Box Press (Ctrl +v) you will see the clone option window is open
And use the following setting set the Chamfer Box like this
[11]-Create a Box with following setting:
Length: 262, Width: 238, Height: 7.
Set like this in the front view
[12]-Now apply the Bend Modifier with Amount: 44.5
Your Box should like this in the left view
[13]-Create a Chamfer Box with following setting:
Length: 102, Width: 297, Height: 5, Fillet: 1.8
Set like this in the front view
[14]-Create a Box with following setting:
Length: 40, Width: 11, Height: 5.
Set like this in the top view
[15]-Select the Box drag it and release you will see the clone option window is open
Then use the following setting set the Boxes like this in the top view
[16]-Create a Chamfer Box with following setting:
Length: 27, Width: 9, Height: 4, Fillet: 0.64
Set like this in the top view
Now create a multiple copies of the Chamfer Box set like this in the top view
[17]-Open the Material Window
Click on the Standard button and select the Architectural mode
Select the Glass-Translucent and Pick the color the color like this
And assign to the red object
[18]-Make a material like this and assign to the plane
[19]-After assign the material press (F9) and you will see the final is ready
Save the file in your folder
Thanks for watching my tutorial
stock 3d models
vrml model
working model 3d
Photoshop design sale banner logo in photoshop
Photoshop design medical icon logo in photoshop
Today I will teach you about How to Create Photoshop Electric Iron Logo Icon
[1]-First of all Open New Document of Custom size, Height & Width 350×400 pixels,Resolution 72 & Mode RGB Color
[2]-Now Open New Layer & then create the following shape with the help of Pen Tool,right click select Make Selection
[3]-Now use the following settings in Make Selection
[4]-Now your image should look like as shown below
[5]-Now fill the selection with ‘e6e5e3′ color & then create the following selection with the help of Pen Tool & then press
DELETE
[6]-Now create the following selection with the help of Pen Tool & then fill with ’same color’ as used in previous step
[7]-Now select “Burn Tool” 
& create the following shading
[8]-Now select “Dodge Tool” 
& create the following selection with the help of Elliptical
Marquee Tool & then highlight the some parts with the help of Dodge Tool
[9]-Now press Ctrl+Shift+I & then Highlight the some parts like as shown below
[10]-Now Open New Layer & then create the following selection with the help Pen Tool
[11]-Now fill the selection with ‘44b7d2′ color & then create the following selection with the help of Pen Tool & then press
DELETE
[12]-Now create the following shading & highlight the some parts with the help of ‘Burn’ & ‘Dodge Tool’
[13]-Now set the 9 pxl Dodge Tool 
& then create the following shape with the help of Pen Tool
right click select ‘Stroke Path’
[14]-In Stroke Path select ‘Dodge’ & then ok
[15]-Now your image should look like as shown below
[16]-Now like this create the others & then set the 1 pxl Burn Tool & create the following shape with the help of Pen Tool,
right click select “Stroke Path”
[17]-In Stroke Path select ‘Burn’ & then Ok
[18]-Now create the some outer parts with the help of Brush Tool & then create final shading with the help of Burn & Dodge
Tool
[19]-Now set the 5 pxl Brush & Open New Layer & then create the following shape with the help of Pen Tool,right click
select ‘Stroke Path’
[20]-In Stroke Path select ‘Brush’ & then ok
[21]-Now your image should look like as shown below
[22]-Now go to Blending Options,select Bevel & Emboss & use the following settings
Photoshop Technique-How to use the Bevel & Emboss feature
[23]-Now your image should look like as shown below & then create the other shape with the help of Pen Tool
[24]-Now Open New Layer & then create the following selection with the help of ‘Elliptical Marquee Tool’
[25]-Now fill the selection with ‘e8e7ed’ color & then go to Blending Options select Drop Shadow & use the following settings
Photoshop Technique-How to use the Drop Shadow feature
[26]-Now select Inner Glow & use the following settings
Photoshop Technique-How to use the Inner Glow feature
[27]-Now select Bevel & Emboss & use the following settings
Photoshop Technique-How to use the Bevel & Emboss feature
[28]-Now Open New layer & then create the following selection with the help of Pen Tool
[29]-Now fill the selection with any color & then set the 1 pxl Brush & then Open New Layer & create the following shape
with the help of Pen Tool,right click select Stoke Path
[30]-In Stroke Path select ‘Brush’ & then Ok.Then Open New Layer & create the following shape with the help of Pen Tool,right click
select Stroke Path
[31]-In Stroke Path select ‘Brush’ & then ok & after that reduce the opacity of this Layer
[32]-Now like this create the Others & then Open New Layer [this Layer should below all Layers] & create the following
selection with the help of Pen Tool
[33]-Now fill the selection with ‘e6e5e3′ color & then go to Blending Options,select Bevel & Emboss & use the following
settings
Photoshop Technique-How to use the Bevel & Emboss feature
[34]-See below for Final Photoshp Output.I hope this is a good tutorial & U can use these Photoshop Techniques in your
Graphics Design Project
bubble effect in photoshop
bubble letters in photosho
bubbles for photoshop
Photoshop design unique mouse logo in Photoshop
Photoshop design toy pencil logo in photoshop
& create the following
& Highlight the some Parts like as shown below
& create the any Text
